AquaKara_101

Shower phone case with built-in Bluetooth speaker

Bring your own phone's screen and audio into your shower routine. AquaKara mounts to a suitable wall, holds your phone behind a clear window and plays Bluetooth audio through its built-in speaker. Adjust it for portrait or landscape viewing.

Phone and AC wall charger are not included.

Deep Black · Soft White · Slate Gray

Before you buy

  • Phone: Bare body up to 170 mm high × 86 mm wide. Both limits apply. Remove the protective case; the lid and latch must close fully without force. Foldables are not officially supported.
  • Wall: The whole mounting pad needs one continuous, smooth, flat, rigid, non-porous area with full contact.
  • First installation: Leave the wall mount unloaded for 24 hours before attaching the case.
  • Use: Normal shower use only. Do not submerge AquaKara.
  • Charging: Dry product, dry port, dry location—away from running water.

Back AquaKara through the Kickstarter campaign.

Have a question before buying? Contact us.

Your phone's screen. AquaKara's speaker.

Listen to a podcast, put on a playlist or keep a video in view. AquaKara brings your own phone and a Bluetooth speaker together in a wall-mounted case.

See and use your screen

The clear front keeps the phone screen visible and allows interaction through the window. Touch behavior can vary; don't assume every phone or app will respond the same way.

Audio built into the case

Pair your phone with AquaKara to play its Bluetooth audio through the integrated speaker.

Buttons for the essentials

Use AquaKara's buttons for power, play/pause, Bluetooth disconnection, volume and tracks. Functions can vary with the connected phone, app and connection state.

Portrait or landscape

Rotate the case and adjust the tilt to suit what you're viewing.

View controls
Speaker and controls detail
Portrait, landscape and tilt

Make sure AquaKara fits your setup.

Check your phone

Measure the phone's body with its protective case or cover removed:

  • Maximum height: 170 mm
  • Maximum width: 86 mm

Your phone must meet both limits. A screen-size label such as a diagonal measurement does not tell you the phone's body size or whether the enclosure will close.

The dimensions are the first check. The phone must also fit without force, with the lid fully closed and the snap-lock latch securely locked. If it prevents either from closing properly, do not use AquaKara with that phone.

Remove the protective phone case or cover before insertion. Foldable smartphones are not officially supported. The size limits do not guarantee that every phone shape, camera bump or screen-protector combination will fit.

Unsure about your phone? Contact us before buying.

Bare-phone body dimensions
Phone insertion figure
Latch and lid closure

Check your wall

The entire mounting pad must sit against one intact, continuous area. It needs a surface that is smooth, flat, rigid and non-porous, with full contact and no gaps beneath the pad.

Do not mount across grout lines, joints or seams, or onto holes, pits, open pores, cracks or chips. Avoid grooves, ridges, raised texture and rough, curved, warped, uneven or peeling surfaces. Any area that prevents full pad contact is unsuitable.

“Tile” or “glass” alone is not enough to confirm suitability. The surface's finish, shape and condition must meet the requirements. Keep the factory-fitted adhesive pad on the mount on every supported surface, including glass.

Clean and fully dry the area before installation. After fitting the mount, leave it undisturbed and unloaded for 24 hours, then check that it is secure before attaching the case.

Full contact on one suitable area
Grout, joints or seams
Holes and pits
Open pores
Grooves, ridges and raised texture
Curved, warped or uneven surfaces
Peeling, cracked or chipped areas
Check wall suitability

First installation and everyday use are different.

First installation: Prepare a suitable wall, peel the liner from the factory-fitted pad, press and tighten the mount, then leave it unloaded for 24 hours. Check the hold before attaching the case with its mounting adapter.

Everyday use: Check the mounting, pair or reconnect your phone before insertion, and put the bare phone inside with the screen facing the clear window. Fully close the lid, latch and charging-port cover. Adjust for portrait or landscape and start playback.

Use AquaKara only for normal shower use. Do not submerge it or intentionally direct high-pressure water into the speaker area, charging port, latch or seal area. Dry the outside before opening. Charge only when the product and port are dry, in a dry location away from running water.

See how it works
24-hour unloaded wait
Pair with phone outside
Phone insertion figure

What's included

  1. AquaKara shower phone case with built-in Bluetooth speaker
  2. Twist-Tight Wall Mount
  3. USB-A to USB-C cable
  4. Twist-Tight Mount Adapter

The adhesive mounting pad is already fitted to the wall mount. The Mount Adapter connects the case to the mount; it is not a power adapter.

Your phone and an AC wall charger are not included.

AquaKara at a glance

Detail Information
Model AquaKara_101
Product Wall-mounted shower phone case with built-in Bluetooth speaker
Phone fit Bare phone up to 170 mm high × 86 mm wide; both limits apply, case removed and full closure required. Foldables not officially supported.
Viewing Portrait and landscape; 360° rotation with tilt
Audio connection Bluetooth; pairing name AquaKara_101
Controls Power, play/pause, Bluetooth disconnect, volume and track buttons; behavior can vary with phone/app/connection state
Charging USB-C input; standard DC 5 V / 1 A USB source. Dry charging only.
Battery Built-in rechargeable battery; not user-replaceable
Mounting Twist-Tight Wall Mount with factory-fitted adhesive pad; suitable surface and 24-hour unloaded initial wait required

Check the details for your purchase.

During the Kickstarter campaign, the purchase or pledge route and campaign-specific payment and shipping arrangements are handled through the Kickstarter campaign and pledge-management process.

Delivery

Campaign-specific pledge, payment and shipping arrangements are handled through the Kickstarter campaign and pledge-management process.

View shipping & delivery

Returns and warranty

Campaign-specific pledge, payment and refund arrangements are governed by the Kickstarter and Pledge Manager process and applicable law. The Shopify Direct voluntary change-of-mind return policy does not automatically apply to Kickstarter pledges.

If you have a problem with a delivered AquaKara product, contact AquaKara Limited for support.

Nothing in this policy limits any mandatory consumer rights that apply to your purchase.

View returns & warranty

A question before you decide?

Ask us about fit, installation or the product. You don't need an order number to get in touch.

Contact us

Ready to choose?

Explore the setup before you decide.

See how it works